Crate TXB50 Specifications download pdf (Page 12)

1400 Ferguson Avenue • St. Louis, MO 63133

P/N 47-488-01 • 03/02

TECHNICAL SPECIFICATIONS

OUTPUT POWER RATING 50W RMS @ 10% THD, 4 ohms, 13.6VDC in

INPUT IMPEDANCE 220k ohm

MAXIMUM SIGNAL ACCEPTED 12V peak to peak

GAIN Input 52dB

CD Input 23dB

Insert 37dB

SENSITIVITY Input 25mV RMS

Line In Insert 150mV RMS

EQS Low 19dB range @ 60Hz

Low Mid 25dB range @ 200Hz

High Mid 16dB range @ 1kHz

High 28dB range @ 10kHz

INSERT JACK Tip Line In

Ring Line Out

Sleeve Ground

SPEAKER Crate Custom Design 10”, 4 ohm, 50 watt

1.0” voice coil, 30 oz magnet

POWER REQUIREMENTS Internal 12 volt DC power supply, 18VA

SIZE AND WEIGHT 18-1/2”W x 13-1/2”H x 12-1/2”D; 22 lbs.

The TXB50 is enclosed in a rugged, molded high tech polymer cabinet.

Wipe the enclosure with a damp, lint-free cloth to remove dirt and road

film. Never spray cleaning agents directly onto the enclosure. Do not

use abrasive cleansers which will damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason,

the specifications and information in this manual are subject to change without notice.

www.crateamps.com

1 2 ... 7 8 9 10 11 12

No comments

Crate TXB50 Specifications Page 12