Crate BV300H Specifications download pdf (Page 6)

22

22

20

20

18

18

16

16

21

21

19

19

17

17

16.Channel 3 Select Switch: When you want

to use Channel 3, press this switch. The red

LED above this switch lights up when Channel 3

is selected. The BV300H uses instant access

switching – when the footswitch (#28, rear

panel) is connected, either the front panel

channel select switches or the footswitch will

select the desired channel.

17.Gain: Use this control to adjust the input

gain for Channel 3. Towards the “–” side gives

you a punchy tube sound perfect for aggressive

rhythm playing. Towards the “+” side and you’re

asking for some seriously aggressive tones!

18.Treble: Use this control to adjust the top

end level for Channel 2. The Treble control

provides 25dB of boost or cut at whatever fre-

quency the High Freq control (#19) is set to.

19.High Freq Select: Use this control to

choose the frequency where the High control

takes effect – 10kHz, 8kHz, 6kHz, 4kHz or 2kHz.

20.Mid: Use this control to adjust the

midrange level for Channel 3. The Mid control

provides 20dB of boost or cut at 1.2kHz.

21.Level: Use this control to adjust the out-

put level of Channel 3. Use this control along

the Gain control (#17) to get the sound you’re

looking for on Channel 3.

22.Bass: Use this control to adjust the low

end level for Channel 3. The Bass control pro-

vides 18dB of boost or cut at 100Hz.

THE FRONT PANEL - Channel 3:

6

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments