Crate VTX200 User's Guide download pdf (Page 16)

VTX200 TECHNICAL SPECIFICATIONS:

Output Power Rating 70W per channel @5% THD, 8 ohm load

100W per channel @5% THD, 4 ohm load

Speaker Size and Rating (2) Celestion Seventy 80W 12” 8 ohm

Input Impedance 470kΩ

Total System Gain Ch 1 74dB, all controls @10

Ch 2 88dB, all controls @10

Ch 3 103dB, all controls @10

Maximum Input Signal Accepted 5 volts peak-to-peak

Channel 1 Low Control 26dB range @ 70Hz

Mid Control 10dB range @ 900Hz

High Control 20dB range @ 10kHz

Channel 2 Low Control 26dB range @ 70Hz

Mid Control 10dB range @ 900Hz

High Control 20dB range @ 10kHz

Channel 3 Low Control 17dB range @ 100Hz

Mid Control 16dB range @ 1kHz

High Control 12dB range @ 7kHz

Power Requirements 120 VAC, 60Hz, 95VA

100/115VAC, 50/60Hz, 95VA;

230VAC, 50/60Hz, 95VA

Size and Weight 21” H 27-3/4” W x 11-1/4” D, 45 lbs.

The VTX200 is covered with a durable Tolex material: wipe it clean with a lint-free cloth.

Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

www.crateamps.com

@2004 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63133

47-387-01 • 072304

VTX200

Three-Channel Guitar Amplifier with Stereo DSP

1 2 ... 11 12 13 14 15 16

No comments

Crate VTX200 User's Guide Page 16